Product Category
(Click on  to see Sub Categories)
|
|---|
Abrasives (14)
Sheets (14) |
|
|
Abrasives - Sheets
|
IF LOADING IS A MAJOR PROBLEM SCREENCLOTH MIGHT BE THE ANSWER
|
| 9x11 220x S/c Screencloth
...plus other(s)
|
A&H ABRASIVES™ SILICON CARBIDE SCREENCLOTH IS COATED THROUGHOUT ITS OPEN MESH CONSTRUCTION FOR FASTER, EASIER REMOVAL OF SOFTER WOOD PRODUCTS:
SEVEN GRITS TO SELECT FROM - 9" X 11" SHEETS ARE SOLD INVIDIDUALLY (CAN BE CUT TO SIZE). USA.
|
|
|
|
Abrasives - Sheets
|
WHAT SHOP CAN OPERATE WITHOUT ABRASIVE SHEETS AND SHEETS OF SANDPAPER?
|
| 9x11 Sheet 60d A/o
...plus other(s)
|
A&H ABRASIVES™ 9" X 11" SANDPAPER SHEETS ARE SOLD IN CONVENIENT SLEEVES OF 10, 50 OR 100 SO YOU CAN STOCK UP ON EXTRA GRITS AT REASONABLE PRICES:
YOU CAN SAVE EVEN MORE BY ORDERING 5 OR MORE SLEEVES AT THE SAME TIME. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
PACKAGES OF 50 AND 100 ABRASIVE SHEETS - 117-117.
|
|
|
|
Abrasives - Sheets
|
QUALITY HERMES COATED ABRASIVES AVAILABLE IN SHEETS OR PSA DISCS
|
| Gcab Garn Ppr 9x11 120c
...plus other(s)
|
HERMES COATED ABRASIVES FEATURE HEAVY PAPER BACKING AND SPECIAL BONDING AGENTS TO GREATLY REDUCE PREMATURE LOADING. SELECTED ABRASIVES INCREASE DURABILITY AND PROVIDE IMPROVED SURFACE QUALITY AND CONSISTENCY OF FINISHES:
SELECT FROM 5" PRESSURE SENSITIVE ADHESIVE (PSA) BACKED DISCS OR 9" X 11" SHEETS. 36, 40, 50, 60 AND 80 GRIT ABRASIVES HAVE D WEIGHT BACKING - 100, 120, 150, 180 AND 220 GRIT ARE ON C WEIGHT. BUY BY THE BOX AND SAVE! GERMANY.
|
|
|
|
Abrasives - Sheets
|
ROYAL AL-OX FLEXIBLE SANDPAPER IN 9" X 11" SHEETS
|
| 9x11 Royal Sheet 80c A/o
...plus other(s)
|
FOLD AN ORDINARY PIECE OF SANDPAPER AND WATCH THE ABRASIVE FALL OFF - USE IT WITH THAT CREASE AND IT'LL WEAR OUT IN A FEW MINUTES. HOWEVER, ROYAL ALUMINUM OXIDE SANDPAPER WILL STILL BE WORKING LONG AFTER THE OTHERS WEAR AWAY:
FOLD IT TO SAND IN TIGHT SPACES, USE IT TO BREAK EDGES AND SAND PROFILES, "SCRUNCH" IT TO GET INTO NOOKS AND CRANNIES - FLEXIBLE, RESIN BONDED ADHESIVE KEEPS ABRASIVE GRAINS FIRMLY ATTACHED. HIGH PERFORMANCE STEARATE COATING PROVIDES MAXIMUM RESISTANCE TO CLOGGING AND LOADING. EXCELLENT GRAIN BONDING ALSO PROVIDES BETTER EDGE WEAR RESISTANCE. FINER SCRATCH PATTERN FOR IMPROVED FINISHES - 80 TO 220 GRIT. 9" X 11" SHEETS; 10 AND 50 SHEET SLEEVES.
|
|
|
|
Abrasives - Sheets
|
SILICON CARBIDE ABRASIVE SCREENCLOTH STANDS UP TO LOADING
|
| 9x11 150x S/c Screencloth
...plus other(s)
|
SHARP SILICON CARBIDE GRAIN IS COATED THROUGHOUT THE OPEN MESH CONSTRUCTION OF THESE DURABLE 9" X 11" SCREENCLOTH SHEETS:
AVAILABLE IN SIX GRITS RANGING FROM 80 TO 220. CAN BE CUT TO FIT HALF SHEET SANDERS.
|
|
|
|
Abrasives - Sheets
|
HANDY 9" X 11" SANDPAPER SHEETS
|
| 9" X 11" 60d A/o
...plus other(s)
|
A&H ABRASIVES™ 9" X 11" SANDPAPER SHEETS ARE SOLD IN SLEEVES OF 50 OR 100 SO YOU CAN STOCK UP ON A FEW EXTRA GRITS:
SAVE BY GETTING 5 OR MORE SLEEVES. USA.
|
|
|
|
Abrasives - Sheets
|
MICRO-MESH FINISH SANDING KIT - ULTRA FINE CUSHIONED ABRASIVE SHEETS FOR "FINER" FINISHING
|
| Micro Mesh Kit 9grits 3x4shts+bloc
...plus other(s)
|
USE THE MICRO-MESH FINISH SANDING KIT TO BRING PAINT AND POLYESTER FINISHES OR WOOD AND PLASTIC SURFACES TO AN EXTREMELY HIGH GLOSS (HAND APPLICATION ONLY):
KIT INCLUDES NINE REUSABLE 3" X 4" SHEETS (1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000 GRIT) PLUS A 3" X 4" FOAM SANDING BLOCK. CONSISTENTLY GRADED CRYSTAL ABRASIVES WITH AN INNER CUSHIONING LAYER ON SUPER FLEXIBLE BACKING ENSURE ONLY THE FINEST "SEE THROUGH" FINISH. TO USE, SMOOTH WORKPIECE WITH CONVENTIONAL SANDPAPER, THEN WET SAND WITH INCREASINGLY FINER GRIT MICRO-MESH TO REMOVE EVEN THE SMALLEST IMPERFECTIONS. SHEETS CLEAN UP WITH WATER, ALLOWING THEIR USE UP TO 15 TIMES LONGER THAN NORMAL ABRASIVES. CAN ALSO BE USED TO POLISH AND RESTORE "SMOKED" OR SCRATCHED PLASTIC LENSES TO OPTICAL CLARITY. REPLACEMENT SHEETS AVAILABLE IN PACKAGES OF 5.
|
|
|
|
Abrasives - Sheets
|
WOODTEK® PNEUMATIC DRUM SANDERS FEATURE SEPARATE FLAP SANDING OR BUFFING HEADS
|
| 4"x12" 80j A/o Open Loading
...plus other(s)
|
THE WOODTEK® FLAP SANDING HEAD/PNEUMATIC DRUM SANDER (120-029) (SHOWN WITH OPTIONAL STAND) FEATURES A 4" WIDE X 8-1/2" DIA. FLAP SANDING HEAD WITH 12 BRUSHES (100 GRIT, J WEIGHT BRUSHES INCLUDED) - IDEAL FOR SANDING CONTOURS WITHOUT CHANGING THEIR SHAPES.
120-032 - BUFFING HEAD/PNEUMATIC DRUM SANDER (NOT SHOWN) HAS A 1" WIDE X 8" DIA. WHEEL FOR BUFFING AND FINE POLISHING. EACH COMES WITH 4" DIA. X 6" WIDE PNEUMATIC SANDING DRUM. WHEN SLIGHTLY INFLATED, DRUM CONFORMS TO CONTOURS - FULLY INFLATED, IT PROVIDES STRAIGHT, FLAT SANDED SURFACES (120 GRIT DRUM SLEEVES INCLUDED). ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED. 120-035 - OPTIONAL STAND FITS EITHER SANDER.
SPECIFICATIONS:
MOTOR - 1HP, 115/230V, 1PH, 12A, 1,720 RPM (8'L POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. FLAP SANDING HEAD SHAFT - 1" DIA. X 8-1/2". BUFFING HEAD SHAFT - 3/4" DIA. X 6-1/2". OVERALL DIMENSIONS - 9"H X 17-1/4"W X 12-1/4"D. NET WEIGHT - 60 LBS. SHIPPING WEIGHT - 92 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Abrasives - Sheets
|
REPLACEMENT H&L ABRASIVE SHEETS FOR VARIO PRO SANDERS
|
| 100 Grit 3.5" X 4" H&l Back
...plus other(s)
|
THESE 25-COUNT PACKAGES CONTAIN THE SAME, HIGH QUALITY HOOK AND LOOP (H&L) ABRASIVE SHEETS THAT ORIGINALLY CAME WITH THE VARIO PRO SANDER KIT:
3-1/2" X 4" SHEETS - AVAILABLE IN 80, 100, 120, 150, 180 AND 220 GRITS. SIMPLY PRESS INTO PLACE AND BEGIN SANDING, ONCE YOU HAVE LOCKED VARIO PRO SANDER PATTERN PLATES TO DUPLICATE THE SURFACE. ABRASIVES CAN BE CHANGED WITHOUT ALTERING LOCKED-IN PROFILE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Sheets
|
SCOTCH-BRITE™ HAND PADS FOR CLEANING, FINISHING AND MICRO DEBURRING
|
| Scotch Brite 1500 Grit, White
...plus other(s)
|
3M™ SCOTCH-BRITE™ 6" X 9" HAND PADS CAN BE USED WITHOUT SOLVENTS AND APPLIED DIRECTLY ONTO ANY MATERIAL OR SHAPE:
A COST EFFECTIVE ALTERNATIVE TO TRADITIONAL MATERIALS LIKE STEEL WOOL, EMERY CLOTH AND COATED ABRASIVE PAPER. PROVIDE A CONSISTENT FINISH AND INCREASE PRODUCTIVITY. USA.
|
|
|
|
Abrasives - Sheets
|
GARNET SANDPAPER IS STILL THE BEST
|
| 9x11 Garnet 60c
...plus other(s)
|
A&H ABRASIVES™ GARNET SANDPAPER IS STILL THE BEST WAY FOR GETTING THE SMOOTHEST FINISH ON WOOD:
THE NATURAL GRAIN FRACTURES MORE QUICKLY THAN MANMADE ABRASIVES AND LEAVES A FINER FINISH. 9" X 11" SHEETS IN SLEEVES OF 10 SHEETS. USA.
|
|
|
|
Abrasives - Sheets
|
SAND DIFFICULT CONTOURS EASILY USING THE SIX PIECE SOFT-SANDERS™ KIT
|
| 2-3/4"x5"psa 40j Paper Fsoftsander
...plus other(s)
|
DESIGNED TO HANDLE ALMOST ANY SHAPE, SOFT-SANDERS™ FLEXIBLE SANDING BLOCKS ARE PERFECT FOR WOODWORKING, MARINE, AUTO OR DRYWALL APPLICATIONS:
SIX BLOCKS WITH DIFFERENT SHAPES AND THREE DIFFERENT DENSITIES ARE SOFT ENOUGH TO BE PRESSED INTO PLACES THAT ARE HARD TO SAND WHILE SOFT, ROUNDED EDGES VIRTUALLY ELIMINATE GOUGING. UNIQUE CORNER-N-COVE™ BLOCK WITH OFFSET HANDLE ALLOWS FOR A CLEAR VIEW OF THE SURFACE BEING SANDED. EXTREMELY DURABLE AND RESISTANT TO MOST SOLVENTS. TAPERED EDGES ALLOW YOU TO SAND UP TO AND UNDERNEATH HARD-TO-ACCESS AREAS. FOR BEST RESULTS, USE WITH 2-3/4" X 5" PRESSURE SENSITIVE ADHESIVE (PSA) SANDPAPER (SOLD SEPARATELY). USA.
|
|
|
|
Abrasives - Sheets
|
LIQUID ABRASIVE PRODUCES BEAUTIFUL POLISHED FINISHES
|
| Micro Mesh Woodworkers Kit
...plus other(s)
|
3MG8 MICRO-GLOSS® LIQUID ABRASIVE CAN BE USED WITH ABRASIVE SHEETS (NOT INCLUDED) FOR SOLID SURFACE MATERIAL TOUCH-UPS:
GENERAL PURPOSE, WATER-BASED LIQUID USES 1 MICRON ABRASIVE CRYSTALS FOR THE REMOVAL OF SCRATCHES, HAZINESS AND HALOS. 8 OZ. CONTAINER. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Sheets
|
STARRETT®/BAHCO®/MILFORD® REPLACEMENT BAND SAW BLADES
|
| 1x156-1/2x.035 1.1h Fl Bndsaw Bl
...plus other(s)
|
WOODWORKER'S SUPPLY® QUICK REFERENCE BAND SAW BLADE CHART LETS YOU MATCH A BLADE TYPE WITH YOUR CUTTING NEEDS:
ALL BLADES HAVE A RAKER SET AS SHOWN IN FIGURE A. THE RAKER TOOTH ACTS AS A RUDDER TO KEEP YOUR CUT TRUE AND IT CLEANS AS IT CUTS TO PREVENT CLOGGING AND BURNING. TOOTH CONFIGURATIONS ARE SHOWN IN FIGURE B. STANDARD TEETH HAVE A 0° ANGLE AND ARE USED FOR GENERAL PURPOSE SAWING. THEY GIVE A SMOOTH CUT AND ARE RECOMMENDED FOR INTRICATE CURVES AND STRAIGHT CUT OFF WORK. SKIP TEETH HAVE A 0° ANGLE WITH SHALLOW GULLETS THAT PROVIDE AMPLE CHIP REMOVAL. LARGE GULLETS RESIST CLOGGING. HOOK TEETH HAVE A 10° ANGLE THAT BITES MORE AGGRESSIVELY INTO THE MATERIAL, REQUIRING LESS FEED PRESSURE. SAW BLADE LENGTHS RANGE FROM 52-3/4" TO 177".
|
|
|
|
