|
|
|
Abrasives - Not Listed Elsewhere
|
REACH HARD TO REACH AREAS WITH SANDING CORD AND TAPE
|
| .055" Cord Roll (50ft)
...plus other(s)
|
HANDY 50 FOOT SPOOLS OF 150-GRIT ALUMINUM OXIDE ABRASIVE TAPE OR CORD MAKE IT POSSIBLE TO SAND THOSE "NEAR TO IMPOSSIBLE PLACES" WITH EASE:
EXCELLENT FOR SANDING HOLES, INSIDE DIAMETERS, TURNINGS AND IRREGULAR SHAPES. ESPECIALLY USEFUL FOR LATHE, CARVING OR REFINISHING WORK. 0.005" DIA. CORD; 3/16" WIDE TAPE. ALSO USEFUL FOR AUTO BODY REPAIRS, PLUMBING AND METAL WORKING. A MUST FOR EVERY TOOL KIT!
|
|
|
|
Abrasives - Not Listed Elsewhere
|
VITRIFIED AND RESIN BONDED MOUNTED POINTS
|
| Vitrified Mounted Points
...plus other(s)
|
A&H ABRASIVES™ VITRIFIED AND RESIN BONDED MOUNTED POINTS ARE PRECISION GRINDING SPECIALITY PRODUCTS:
VITRIFIED POINTS ARE 60 GRIT ALUMINUM OXIDE GRAIN, HEATED AND COMPRESSED TO SHAPE ON A 1-1/2" LONG X 1/4" DIA. SHANK. PINK VITRIFIED POINTS ARE USED FOR DEBURRING AND FINISHING FERROUS METALS. GRAY RESIN BONDED POINTS ARE 36 GRIT ALUMINUM OXIDE GRAIN. PERFECTLY BALANCED FOR FAST FERROUS METAL REMOVAL AND HEAVY DUTY USE. 1-1/2" LONG X 1/4" DIA. SHANK. NOTE: CUT SPEED IS THE MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
MOUNTED AND UNMOUNTED FLAP SANDING WHEELS
|
| 6" X 1-1/2" X 1" 60x Flap Wheel
...plus other(s)
|
A&H ABRASIVES™ ALUMINUM OXIDE MOUNTED AND UNMOUNTED FLAP WHEELS ARE WELL SUITED FOR DEBURRING, SCALE REMOVAL, CLEANING AND SURFACE PREPARACTION ON FERROUS AND NON-FERROUS METALS, PLASTICS, RUBBER AND WOOD:
MOUNTED FLAP WHEELS HAVE A 1/4" SHANK ALLOWING MOUNTING ON A 1/4" OR LARGER CHUCK - IDEAL FOR HIGH RPM DIE GRINDERS, AIR TOOLS, DRILL MOTORS AND OTHER PORTABLE AND STATIONARY POWER TOOLS. UNMOUNTED FLAP WHEELS ARE BEST FOR A UNIFORM FINISH ON CONTOURED PARTS (METAL, PLASTIC, WOOD) - USE WITH PORTABLE AIR TOOLS, ELECTRIC TOOLS AND BENCH GRINDERS. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
1/4-20 FLAP WHEELS AND ADAPTERS - TWIST ON, TWIST OFF CONVENIENCE
|
| 3x1x1/4-20 Mounted Flap Whl 120a/o
...plus other(s)
|
YOU GET ALL OF THE HIGH SPEED, FAST CUTTING BENEFITS WITH THE CONVENIENCE OF TWIST ON, TWIST OFF CONNECTIONS WITH A&H ABRASIVES™ 1/4-20 FLAP WHEELS AND ADAPTERS:
FLAP WHEEL ADAPTERS ALLOW FOR WHEEL QUICK CHANGES WITHOUT HAVING TO REMOVE THE ADAPTER FROM YOUR 1/4" CHUCK TOOL - TWO LENGTHS TO SELECT FROM. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
SURFACE PREPARATION DISC HOOK AND LOOP BACKUP PADS AND MANDRELS
|
| 3" X 1/4" H&l Surf Prep B/u Pad
...plus other(s)
|
A&H ABRASIVES™ H&L BACKUP PADS AND MANDRELS HAVE A HEAVY DUTY LOOP DESIGNED TO FIRMLY HOLD SURFACE PREP DISCS:
FIT MOST ANGLE GRINDERS, DIE GRINDERS AND ANY TOOL THAT ACCEPTS A 1/4" MANDREL. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SURFACE PREPARATION H&L DISCS - 125-576.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
ALUMINUM OXIDE CARTRIDGE ROLLS FEATURE RESIN BOND CLOTH
|
| 1/8x1-1/2x1/4 Cartridgeroll Mandrl
...plus other(s)
|
A&H ABRASIVES™ CARTRIDGE ROLLS OFFER UNEQUALLED ECONOMY AND FAST CUTTING:
IN USE, EACH LAYER OF CLOTH WEARS THROUGH TO EXPOSE NEW CUTTING SURFACES THAT CONTINUE TO CUT AND POLISH. EXCELLENT FOR DEBURRING, BLENDING AND POLISHING. AVAILABLE IN A WIDE RANGE OF GRITS AND SIZES TO MEET YOUR REQUIREMENTS. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
SAITECH ULTIMATE PERFORMANCE GRINDING WHEELS - THESE ARE THE GOOD ONES!
|
| 7x1/4x7/8 T27 Grind Whl Ceramic
...plus other(s)
|
SAITECH TYPE 27 (FLAT FACE) ULTIMATE PERFORMANCE GRINDING WHEELS ARE CONSTRUCTED USING 3M CUBITRON™ CERAMIC GRAIN, MAKING THEM IDEAL FOR THE TOUGHEST MATERIALS:
BEST SUITED FOR CUTTING STAINLESS STEEL AND OTHER HIGH TENSILE ALLOYS. AVAILABLE WITH STANDARD CENTER BORE OR PATENTED SUPER-LOCK 5/8-11 HUB. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
TYPE 1 HIGH SPEED CUT OFF WHEELS EXCEL AT METAL CUTTING
|
| 4x.035x5/8 T1 Cut Off Wheel
...plus other(s)
|
SAITECH TYPE 1 CUT OFF WHEELS CUT FAST AND LAST AN EXTREMELY LONG TIME:
THREE SIZES TO CHOOSE FROM - 3M CUBITRON™ CERAMIC GRAIN WHEELS CAN BE USED ON STAINLESS STEEL, FERROUS METALS AND HIGH TENSILE ALLOYS. NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA. OPTIONAL WHEEL ADAPTERS AND MANDREL SET ALLOW YOU TO ACCOMMODATE DIFFERING BORE DIAMETERS - 1/4" SHANKS.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
CHOP SAW WHEELS FOR CUSTOM CUTTING APPLICATIONS
|
| 16x3/32x1 Studking Chop Saw Wheel
...plus other(s)
|
SAIT CHOP SAW WHEELS INCORPORATE SPECIAL FORMULATION AND A UNIQUE BONDING SYSTEM TO PROVIDE THE "ULTIMATE PERFORMANCE" IN CUTTING METALS WITH LOW HORSEPOWER MACHINES:
SAITECH STEEL WORKER™ COMBINES EXTREMELY FAST CUTTING WITH LONG LIFE - EXCELLENT FOR STAINLESS STEEL AND ALL FERROUS METALS. FORMULATED WITH 3M CUBITRON™ CERAMIC GRAIN. STUD KING® WORKS BEST CUTTING THIN METAL AND METAL STUDS WHILE IRON WORKER™ SLICES THROUGH HEAVY METALS AND ANGLE IRON. BOTH FEATURE ALUMINUM OXIDE GRAIN. NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
GRINDING SPECIALITIES - TYPE 16, 17, 18 AND 18R CONES AND PLUGS
|
| 2-3/4x3-1/2x5/8-11 Type 16 Cone
...plus other(s)
|
CONES AND PLUGS ARE MADE FOR HEAVY DUTY GRINDING AND SNAGGING IN HARD-TO-REACH AREAS:
RESIN BONDED 16 GRIT ALUMINUM OXIDE GRAIN IS DESIGNED FOR FAST REMOVAL AND LONG LIFE. 5/8-11 BORE.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
SPECIALITY ABRASIVE WHEELS CAN TACKLE CUTTING AND GRINDING
|
| 4-1/2x1/8x7/8 Pipeline Wheel
...plus other(s)
|
SAIT PIPELINE TYPE 27 SPECIALITY WHEELS HAVE BEEN SPECIFICALLY DESIGNED TO PERFORM BOTH CUTTING AND LIGHT GRINDING:
ALUMINUM OXIDE GRAIN; LONG LIFE - FERROUS METALS (STEEL, CAST IRON, ETC.). NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
SATISFY ANY OF YOUR GRINDING WHEEL NEEDS...AT AFFORDABLE PRICES!
|
| Dressing Stick
...plus other(s)
|
THREE DIFFERENT CATEGORIES OF GRINDING WHEEL, FROM CGW ABRASIVE MFG. USA, SHOULD BE ABLE TO MEET ANY OF YOUR GRINDING REQUIREMENTS:
PREMIUM BLUE ALUMINUM OXIDE WHEELS REQUIRE ONLY A MINIMUM OF DRESSING TO KEEP THEM PERFORMING AT PEAK EFFICIENCY: REMOVE MATERIAL VERY QUICKLY FROM ALL TYPES OF STEEL; PARTICULARLY DESIGNED FOR GRINDING HSS OVER 55 RC. AN EXCELLENT ALL AROUND WHEEL FOR YOUR BENCH GRINDER.
WHITE ALUMINUM OXIDE WHEELS ARE ECONOMICAL AND COOL CUTTING: GRAIN IS TOUGH, BUT "FRIABLE," MEANING THAT GRAINS BREAK AWAY, CONTINUOUSLY, TO EXPOSE FRESH, SHARP EDGES. FOR GRINDING ALL TYPES OF STEEL, PARTICULARLY HIGH CARBON TOOL STEEL.
GREEN SILICON CARBIDE WHEELS, HARDER THAN ALUMINUM OXIDE, ARE FOR GRINDING TUNGSTEN CARBIDE CUTTING TOOLS: ALSO DO AN EXCEPTIONAL JOB OF GRINDING HSS, RUNNING SUPER COOL BY ONLY REMOVING A LIMITED AMOUNT OF MATERIAL, GREATLY REDUCING THE CHANCE OF OVERHEATING.
ALL WHEELS HAVE A 1" BORE AND INCLUDE A BUSHING THAT WORKS WITH 3/4", 5/8" AND 1/2" ARBORS. ISRAEL.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
SAND-O-FLEX SANDS CONTOURS WITHOUT CHANGING THEIR SHAPE
|
| 60x Al-ox Plain Refill
...plus other(s)
|
DEVELOPED BACK IN 1945, SAND-O-FLEX IS A PROVEN, BRUSH BACKED SANDER DESIGNED FOR FINISHING A VARIETY OF COMPLEX SURFACES:
WITH ITS FIRM CUSHIONING BRISTLES, SAND-O-FLEX ABRASIVE STRIPS ARE FORCED INTO, AROUND AND OVER CORNERS, HOLLOW AND FLUTED SURFACES AND SMALL OPENINGS. PRESSURE IS DISTRIBUTED EVENLY OVER THE SURFACES TO PREVENT LOSS OF DETAIL AND THE FLATTENING OF ROUNDED AREAS; AS ABRASIVE WEARS, MORE CAN BE FED FROM THE HUB. INCLUDES 80 GRIT SLASHED ABRASIVE, BRUSHES AND 1/4" AND 3/8" DRILL ADAPTER. CHOOSE FROM TWO TYPES OF ABRASIVES - SLASHED OR PLAIN; SLASHED WORKS BEST WITH MOLDINGS AND ODD CONTOURS; USE PLAIN FOR FLAT SURFACES. ABRASIVE REFILLS AVAILABLE IN 60, 80, 120 AND 180 GRITS.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
ABRASIVE FLAP MOPS DESIGNED WITH FLEXIBLITY AS A PRIORITY
|
| 2"x1-3/16" Flap Mops 120j A/o
...plus other(s)
|
A&H ABRASIVES™ FLAP MOPS ARE MANUFACTURED USING THE FINEST ALUMINUM OXIDE ABRASIVE AND SUPER FLEXIBLE "J" WEIGHT, RESIN BONDED CLOTH:
SLASHED MATERIAL ALLOWS THE MOP TO CONFORM TO DIFFICULT CONTOURS WHEN FINISHING, POLISHING AND DEBURRING IRREGULAR SURFACES. THREE GRITS AND TWO SIZES TO CHOOSE FROM. 1/4" DIA. SHANKS. NOTE: CUT SPEED IS THE MAXIMUM RECOMMENDED RPM.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
THE FLAP SANDER TRUSTED FOR FINISH GRADE WORK
|
| 2 X 1 80x Interleafed Flpwhl
...plus other(s)
|
THESE FLAP SANDERS ARE NOT ORDINARY FLAP SANDERS:
EACH IS INTERLEAVED WITH A NYLON, ABRASIVE PAD TO MAKE THEM LESS AGGRESSIVE AND GIVE THEM A MUCH MORE STABLE, CONSISTENT FEEL. YOU CAN ACTUALLY TAKE A PIECE TO FINISH LEVEL WITHOUT HAND SANDING. DESIGNED FOR USE WITH A FLEXIBLE SHAFT TOOL, THESE WHEELS ALSO WORK WELL WITH HAND DRILLS. AVAILABLE IN 2" OR 3" DIAMETER AND A VARIETY OF GRITS - 1/4" SHANK. GERMANY.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
ABRASIVE WOOL THAT WON'T RUST
|
| Abrasive Wool Fine 0(#000-#0000)
...plus other(s)
|
THE MOST CONFORMABLE AND FLEXIBLE ABRASIVE MATERIAL IN THE WORLD, ABRASIVE WOOL HAS GRIT BONDED ONTO ITS FIBERS. USE WET OR DRY - NO STEEL CONTENT MEANS NO RUST:
FINE: FINAL METAL FINISHING AND WOOD POLISHING PREPARATION. MEDIUM: PAINT SURFACE PREPARATION, CLEANING PRIOR TO SOLDERING OR BRAZING. COARSE: FAST CLEANING AND RUST REMOVAL.
COMES IN EASY DISPENSING 4.35 LITER BOX.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
PROXXON SANDERS PERFORM WHERE CONVENTIONAL SANDERS CAN'T REACH
|
| Polishing Set
...plus other(s)
|
WITH ITS UNIQUE OSCILLATING MOTION, THE PROXXON 38520 DELTA DETAIL SANDER GREATLY REDUCES VIBRATION AND KICKBACK AND ALSO ALLOWS THE USE OF ACCESSORIES, INCLUDING CUTTING BLADES:
115V, 3,000-10,000 OSCILLATIONS PER MINUTE VARIABLE SPEED MOTOR. DIE CAST ZINC HEAD - 2.5" X 2.5" X 2.5" TRIANGULAR SANDING AREA USES HOOK & LOOP PADS. INCLUDES TWO 80 GRIT AND TWO 280 GRIT SANDING PADS, SANDING FLEECE, HARD AND SOFT FELT POLISHERS AND STORAGE CASE. 9" LONG; WEIGHS 1.4 LB. 28904 2" X 2.75" SPRING STEEL, FLEXIBLE SCRAPER IS SUITABLE FOR PAINT, TILE ADHESIVE, SILICONE AND TAR REMOVAL. 28888 REPLACEMENT POLISHING SET INCLUDES SANDING FLEECE AND ONE HARD AND ONE SOFT FELT POLISHER - USE TO PUT HIGH GLOSS ON STAINLESS STEEL, PRECIOUS METALS AND PAINT. 28900 2.5" DIA. HSS CUTTING BLADE IS SEMI-CIRCULAR FOR CUTTING INTO CORNERS. CUTS METAL, WOOD (MODEL BUILDING AND HOUSE DECOR) AND OTHER MATERIALS.
FOR SHAPE FINISHING, MORTISING AND FINE POLISHING, THE PROXXON 38536 BELT SANDER FEATURES A DIE CAST ALUMINUM HEAD, HOLDING THE SANDING ARM, WHICH CAN BE SWIVELED THROUGH 60°:
115V, 985-2,300 FPM VARIABLE SPEED MOTOR - 13"L X 13/32"W BELT. SANDING BELT CAN BE CHANGED IN A MATTER OF SECONDS. ALSO SUITABLE FOR DEBURRING METAL, PAINT REMOVAL AND FINE FINISHING. INCLUDES TWO, 100 GRIT, AND TWO, 240 GRIT, BELTS AND CARRYING CASE. 13" LONG; WEIGHS 1.4 LBS. GERMANY.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
UNCUT ALUMINUM OXIDE ABRASIVE ROLLS FOR DRUM SANDERS
|
| 2x60' Abrasive Roll 36y A/o
...plus other(s)
|
HEAVY DUTY, RESIN BONDED, OPEN COAT CLOTH STRIP ABRASIVE ROLLS. CUT LENGTH TO FIT. ESTIMATED NUMBER OF WRAPS PER ROLL:
DELTA® 16-36 - 5.
PERFORMAX 16-32 - 9.
PERFORMAX 22-44 - 6.
PERFORMAX 25-2 - 6.
PERFORMAX 37" - 4.
RYOBI® WDS1600 - 9.
WOODMASTER 26" - 6.
WOODMASTER 38" - 5.
WOODTEK® 25-2 - 6.
INDIVIDUAL 6" X 60' UNCUT HOOK & LOOP, "F" WEIGHT ANTI-STATIC ROLLS FOR WOODMASTER:
118-586 - 60 GRIT. 118-589 - 80 GRIT. 118-592 - 100 GRIT. 118-595 - 120 GRIT. 118-598 - 150 GRIT. 118-601 - 180 GRIT. 118-607 - 220 GRIT.
INDIVIDUAL 2" X 60' UNCUT ROLLS FOR DELTA® 18-36 (MODEL 31-250):
118-421 - 36 GRIT. 118-451 - 60 GRIT. 118-472 - 80 GRIT. 118-481 - 100 GRIT. 118-487 - 120 GRIT. 118-490 - 150 GRIT. 118-496 - 180 GRIT. 118-502 - 220 GRIT.
INDIVIDUAL 3" X 70' UNCUT ROLLS FOR RYOBI®, PERFORMAX AND WOODTEK®:
118-508 - 36 GRIT. 118-523 - 60 GRIT. 118-529 - 80 GRIT. 118-538 - 100 GRIT. 118-544 - 120 GRIT. 118-556 - 150 GRIT. 118-565 - 180 GRIT. 118-568 - 220 GRIT.
|
|
|
|
Abrasives - Not Listed Elsewhere
|
UNCUT ALUMINUM OXIDE ABRASIVE ROLLS FOR DRUM SANDERS
|
| 6"x50' H&l F-wt Abras Rl 60f A/o
...plus other(s)
|
HEAVY DUTY, RESIN BONDED, OPEN COAT CLOTH STRIP ABRASIVE ROLLS:
CUT LENGTH TO FIT. ESTIMATED NUMBER OF WRAPS PER ROLL: DELTA® 18-36 - FIVE PERFORMAX® 16-32 - NINE PERFORMAX® 22-44 - SIX PERFORMAX® 25-2 - SIX PERFORMAX® 37" - FOUR RYOBI® WDS1600 - NINE WOODMASTER 26" - FIVE WOODMASTER 38" - FOUR WOODTEK® 25-2 - SIX
|
|
|
|
Abrasives - Not Listed Elsewhere
|
HIGHEST QUALITY WIRE BRUSH PRODUCTS FOR STRIPPING AND CLEANING
|
| 1x1/4 Knotted .020 Wire End Brush
...plus other(s)
|
A&H ABRASIVES™ WIRE BRUSH PRODUCTS ONLY USE HARDENED AND TEMPERED PREMIUM QUALITY WIRE:
IDEAL FOR DEBURRING, WELD EDGE CLEANING, REMOVAL OF SCALE, SPATTER, HEAVY RUST AND CORROSION. CARBON STEEL (100-931, 100-946, 100-967 USE STAINLESS STEEL WIRE). USA.
|
|
|
|
to see Sub Categories)
