|
|
|
Abrasives - Drums & Sleeves
|
SPIRAL BAND SLEEVES PROVIDE HUNDREDS OF USES
|
| 5/8" X 1" 120x A/o Spiral Band
...plus other(s)
|
PREMIUM QUALITY SPIRAL BAND SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND AND X-WEIGHT CLOTH BACKING:
USE ON OSCILLATING SPINDLE SANDERS, DRILL PRESSES OR HAND HELD TOOLS. PERFECT FOR SMOOTHING EDGES ON CURVED SURFACES AND ODD SHAPES - NO OTHER TOOL CAN SAND OR SMOOTH THE INSIDE OF HOLES BETTER. USA. NOTE: GRIT SIZE IS FOLLOWED BY "X".
|
|
|
|
Abrasives - Drums & Sleeves
|
SMALL ENOUGH TO BE PORTABLE, CLAYTON OSCILLATING SPINDLE SANDER FEATURES BIG MACHINE PERFORMANCE
|
| A/o 1/2",3/4",1" Assorted Sleeves
...plus other(s)
|
THE INDUSTRIAL STRENGTH CLAYTON OSCILLATING SPINDLE SANDER MODEL 140 HAS BEEN SPECIFICALLY DESIGNED FOR BENCH TOP WORK:
110V, 1,700 RPM, 1/2HP BALDOR® INDUCTION MOTOR WITH CAPACITOR START; V-BELT DRIVE. 4-1/2" X 1/2" SPINDLE; 60 OSCILLATIONS PER MINUTE; 3/4" STROKE LENGTH. 14" X 21" STEEL TABLE. 2-1/2" DUST PORT. INCLUDES SANDING DRUM RACK, 1/2", 3/4", 2" AND 3" DRUMS, MATCHING TABLE INSERTS AND 16 SANDING SLEEVES IN FOUR DIFFERENT GRITS. WEIGHS 70 LBS. USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
KIRJES® INFLATABLE SANDERS - THE SMOOTHEST AND MOST FLEXIBLE FORM OF SANDING
|
| 140r Inflatable Bowl Sander
...plus other(s)
|
KIRJES® INFLATABLE SANDERS HAVE THIN WALLED, RUBBER BODIES THAT ARE FITTED WITH SOFT, CLOTH BACKED SANDING SLEEVES. AS THE BODY IS PUMPED UP WITH AIR, THE SLEEVE IS HELD IN PLACE - IDEAL FOR SANDING CONVEX, CONCAVE OR FLAT SURFACES SINCE THE SANDER CONFORMS TO THE SURFACE:
100K COMPLETE SANDING KIT COMES WITH: 913K SANDING AND POLISHING MOTOR - 3,000 RPM, 115V; TWO CHUCKS OPEN 1/16" TO 3/8". 201 FLEXIBLE DRIVE SHAFT - 4'-3" LONG WITH KEYED CHUCK; 7/32" MOTOR END SHAFT. 140R INFLATABLE BOWL SANDER - 1-9/16" DIA. 120 INFLATABLE DRUM SANDER - 3/4" DIA. X 1" LONG. 130 INFLATABLE DRUM SANDER - 1-1/8" DIA. X 3-1/8" LONG. 140 INFLATABLE DRUM SANDER - 1-5/8" DIA. X 1-3/4" LONG. 911 DOUBLE ACTION HAND PUMP. FOUR 220 GRIT SANDING SLEEVES. WOODEN CASE, WRENCHES AND INSTRUCTIONS. 15 LBS. SHIPPING WEIGHT.
100 DRUM SANDING KIT INCLUDES CONTENTS OF COMPLETE SANDING KIT EXCLUDING MOTOR, FLEXIBLE SHAFT AND WRENCHES. 1 LB. SHIPPING WEIGHT.
SWEDEN.
|
|
|
|
Abrasives - Drums & Sleeves
|
5" SPINDLE SANDER SLEEVES
|
| A/o 1/4x5 60,80,100,120,150x, Asst
|
PREMIUM QUALITY SPINDLE SANDER SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND:
DESIGNED FOR JET® (JOVS-10) 5" OSCILLATING SPINDLE SANDERS. AVAILABLE INDIVIDUALLY OR IN A SET. 118-730 - FOUR OF EACH GRIT (20 TOTAL). USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
5-1/2" SPINDLE SANDER SLEEVES
|
| 1/2" X 5-1/2" 60x A/o Spiral Band
...plus other(s)
|
PREMIUM QUALITY SPINDLE SANDER SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND:
SPECIFICALLY DESIGNED FOR JET® (JBOS-5) 5-1/2" OSCILLATING SPINDLE SANDERS. AVAILABLE INDIVIDUALLY OR IN A SET. 118-733 - TWO, EACH, 1-1/2", 2", 3" DIA. - 60, 100, 120 AND 150 GRITS (24 TOTAL). USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
6" SPINDLE SANDER SLEEVES
|
| A/o 3/8" 1/2" 5/8" Asst
|
PREMIUM QUALITY SPINDLE SANDER SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND:
SPECIFICALLY DESIGNED FOR JET® (JBOS-5, JOVS-10) 6" OSCILLATING SPINDLE SANDERS. AVAILABLE INDIVIDUALLY OR IN A SET. 118-736 - FOUR, EACH, 3/8", 1/2", 5/8" DIA. - 60, 100, 120 AND 150 GRITS (24 TOTAL). USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
9" SPINDLE SANDER SLEEVES
|
| A/o 3/4" 1" 2" 3" Asst
|
PREMIUM QUALITY SPINDLE SANDER SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND:
SPECIFICALLY DESIGNED TO OPERATE ON JET® (JOVS-10) AND CLAYTON (125) 9" OSCILLATING SPINDLE SANDERS. AVAILABLE INDIVIDUALLY OR IN A SET. 118-739 - TWO, EACH, 3/4", 1", 2", 3" DIA. - 60, 100, 120 AND 150 GRITS (32 TOTAL). USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
WOODTEK® PNEUMATIC DRUM SANDERS FEATURE SEPARATE FLAP SANDING OR BUFFING HEADS
|
| 4"x6" (6"x13.5") 80j Sleeve A/o
...plus other(s)
|
THE WOODTEK® FLAP SANDING HEAD/PNEUMATIC DRUM SANDER (120-029) (SHOWN WITH OPTIONAL STAND) FEATURES A 4" WIDE X 8-1/2" DIA. FLAP SANDING HEAD WITH 12 BRUSHES (100 GRIT, J WEIGHT BRUSHES INCLUDED) - IDEAL FOR SANDING CONTOURS WITHOUT CHANGING THEIR SHAPES.
120-032 - BUFFING HEAD/PNEUMATIC DRUM SANDER (NOT SHOWN) HAS A 1" WIDE X 8" DIA. WHEEL FOR BUFFING AND FINE POLISHING. EACH COMES WITH 4" DIA. X 6" WIDE PNEUMATIC SANDING DRUM. WHEN SLIGHTLY INFLATED, DRUM CONFORMS TO CONTOURS - FULLY INFLATED, IT PROVIDES STRAIGHT, FLAT SANDED SURFACES (120 GRIT DRUM SLEEVES INCLUDED). ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED. 120-035 - OPTIONAL STAND FITS EITHER SANDER.
SPECIFICATIONS:
MOTOR - 1HP, 115/230V, 1PH, 12A, 1,720 RPM (8'L POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. FLAP SANDING HEAD SHAFT - 1" DIA. X 8-1/2". BUFFING HEAD SHAFT - 3/4" DIA. X 6-1/2". OVERALL DIMENSIONS - 9"H X 17-1/4"W X 12-1/4"D. NET WEIGHT - 60 LBS. SHIPPING WEIGHT - 92 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Abrasives - Drums & Sleeves
|
PNEUMATIC SANDING DRUMS LET YOU ADJUST HARDNESS TO FIT PROJECTS
|
| Sandboss Sb1750 Sanding Drum
...plus other(s)
|
INCREASE DRUM AIR PRESSURE WHEN SANDING SQUARE EDGES OR REDUCE PRESSURE FOR ROUNDED EDGES AND COMPOUND CURVES. SANDBOSS PNEUMATIC SANDING DRUMS CAN BE USED IN DRILL PRESSES, HAND DRILLS AND FLEX SHAFTS:
SB1750 DRUM - 1-3/4" DIA. X 2-1/2"L; 5/16" SHANK. SB2500 DRUM - 2-1/2" DIA. X 3-5/8"L; 5/16" SHANK. SB4000 DRUM - 3-3/4" DIA. X 5-3/8"L; 5/16" SHANK. SB1500 DRUM - 1-9/16" DIA. X 4-1/2"L; 3/8" SHANK. SANDBOSS KIT INCLUDES INCLUDES SB-1750, -2500 AND -4000 DRUMS, ONE 120 GRIT SLEEVE FOR EACH AND DURABLE CARRYING CASE. INFLATE WITH BICYCLE PUMP (NOT INCLUDED) - 15 PSI MAXIMUM. CNC MACHINED AND MOLDED PARTS AS WELL AS THE HIGHEST QUALITY NATURAL RUBBER.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
122-240 - 80 GRIT SANDING SLEEVE, 1-3/4" DIA. X 2-1/2"L. 122-231 - 80 GRIT SANDING SLEEVE, 1-9/16" DIA. X 4-1/2"L. 122-249 - 80 GRIT SANDING SLEEVE, 2-1/2" DIA. X 3-5/8"L. 122-258 - 80 GRIT SANDING SLEEVE, 3-3/4" DIA. X 5-3/8"L. 122-243 - 120 GRIT SANDING SLEEVE, 1-3/4" DIA. X 2-1/2"L. 122-234 - 120 GRIT SANDING SLEEVE, 1-9/16" DIA. X 4-1/2"L. 122-252 - 120 GRIT SANDING SLEEVE, 2-1/2" DIA. X 3-5/8"L. 122-261 - 120 GRIT SANDING SLEEVE, 3-3/4" DIA. X 5-3/8"L. 122-246 - 220 GRIT SANDING SLEEVE, 1-3/4" DIA. X 2-1/2"L. 122-237 - 220 GRIT SANDING SLEEVE, 1-9/16" DIA. X 4-1/2"L. 122-255 - 220 GRIT SANDING SLEEVE, 2-1/2" DIA. X 3-5/8"L. 122-264 - 220 GRIT SANDING SLEEVE, 3-3/4" DIA. X 5-3/8"L.
|
|
|
|
Abrasives - Drums & Sleeves
|
RUBBER SANDING DRUMS
|
| 1-1/2x1x1/4 Expando Drum
...plus other(s)
|
RUBBER SANDING DRUMS PROVIDE A GENTLE CUSHION THAT CONFORMS TO CONTOURED SHAPES FOR A FINISH THAT RIVALS HAND SANDING:
HIGH QUALITY RUBBER WITH BALANCED STEEL SHAFTS. ALL DRUMS HAVE 1/4" SHANKS EXCEPT 129-010, WHICH HAS A 3/8" SHANK TO FIT YOUR DIE GRINDER OR DRILL CHUCK. USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
SILICON CARBIDE SPIRAL BAND SLEEVES
|
| 1/2" X 1" 60x S/c Spiral Band
...plus other(s)
|
THESE PREMIUM QUALITY SPIRAL BAND SLEEVES FEATURE EXTRA SHARP SILICON CARBIDE, A FULL RESIN BOND AND X-WEIGHT CLOTH BACKING:
USE ON OSCILLATING SPINDLE SANDERS, DRILL PRESSES OR HAND HELD TOOLS. PERFECT FOR SMOOTHING EDGES ON CURVED SURFACES AND ODD SHAPES - NO OTHER TOOL CAN SAND OR SMOOTH THE INSIDE OF HOLES BETTER. USA. NOTE: DIAMETER X LENGTH SHOWN; GRIT FOLLOWED BY "X".
|
|
|
|
Abrasives - Drums & Sleeves
|
TURN AN OLD ELECTRIC MOTOR INTO A HANDY DRUM SANDER
|
| 3" Sanding Drum For .5" Shaft
...plus other(s)
|
BRING NEW LIFE TO THAT UNUSED ELECTRIC MOTOR WITH A SANDING DRUM THAT FASTENS TO THE MOTOR SHAFT USING TWO SOCKET SET SCREWS:
TWO PIECE RUBBER CONSTRUCTION CONTROLS EXPANSION AND MAINTAINS A STRAIGHT FACE FOR A PERFECT FINISH. TIGHTENING THE NUT EXPANDS THE DRUM TO HOLD THE SANDING SLEEVE IN PLACE. USES 3" X 3" SANDING SLEEVES (NOT INCLUDED) - FITS 1/2" OR 5/8" DIA. SHAFTS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
129-020 - 3" X 3" 60 GRIT ABRASIVE SLEEVE.
|
|
|
|
Abrasives - Drums & Sleeves
|
DRUM SANDER KIT HAS SIZES TO PERFECTLY MATCH SPECIFIC JOBS
|
| 1/2" X 1/2" 12pc Sleeve Set
...plus other(s)
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
25-PIECE STANDARD DRUM SANDER KIT HAS A HEX NUT THAT EXPANDS THE DRUM TO GRIP THE CLOTH-BACKED ABRASIVE SLEEVES, TIGHTLY - TO CHANGE SLEEVES, SIMPLY LOOSEN THE NUT:
KIT COMES WITH FIVE DRUMS (1/2"X1/2", 3/4"X1", 1"X1", 1-1/2"X1-1/2", 2"X1-1/2") AND FOUR ABRASIVE SLEEVES (#50 COARSE, #80 MEDIUM, #120 FINE, #180 FINE) FOR EACH DRUM. STANDARD SLEEVE SETS INCLUDE THREE, EACH, #50, #80, #120 AND #180 REPLACEMENT SLEEVES. DESIGNED FOR DISCONTINUED, EXTRA-LONG DRUM SANDER KIT 23-697, EXTRA-LONG SLEEVE SETS INCLUDE THREE, EACH, #50, #80, #120 AND #180 SLEEVES THAT FIT 2" LONG DRUMS (NOT INCLUDED).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Drums & Sleeves
|
REPLACEMENT COMPONENTS FOR WOOD LATHE INFLATABLE DRUM SANDER
|
| 2" X 8" 80x Sanding Sleeve
...plus other(s)
|
ALTHOUGH THE 2" DIA. X 8" INFLATABLE IAC 01600 LATHE MOUNTED CUSHION CONTOUR SANDER IS NO LONGER AVAILABLE, WE DO HAVE WHAT YOU NEED TO HELP YOU KEEP USING THIS HANDY TOOL:
ADAPTER CONVERTS LATHE SANDER INTO A VERTICALLY MOUNTED, DRILL PRESS CONTOUR SANDER (INCLUDES STEEL CENTERING PLATE AND NYLON ATTACHMENT WITH 3/8" DIA. STEEL SHAFT). REPLACEMENT CLOTH BACKED SANDING SLEEVES ARE MADE USING DURABLE ALUMINUM OXIDE. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Drums & Sleeves
|
SANDING DRUMS AND SANDING SLEEVES FOR EVERY NEED
|
| 1.25" X 2" X .25" Sanding Drum
...plus other(s)
|
SANDING DRUMS ARE HIGH DENSITY FOAM WITH BALANCED STEEL SHAFTS - SANDING SLEEVES THAT FIT OVER DRUMS FEATURE RESIN BONDED ALUMINUM OXIDE ABRASIVE (DRUMS AND SLEEVES AVAILABLE SEPARATELY OR IN SETS):
801-510 - 2" LONG SANDING DRUM SET INCLUDES 1/2", 3/4", 1" AND 1-1/2" DRUMS WITH 50- AND 120-GRIT SANDING SLEEVES TO FIT EACH - 1/4" DIA. SHANKS. 808-203 - STANDARD SANDING DRUM SET INCLUDES 1/2" X 1/2", 3/4" X 1", 1" X 1", 1-1/2" X 1-1/2" AND 2" X 1-1/2" DRUMS WITH 50-GRIT SANDING SLEEVES TO FIT EACH. 916-871 - QUICK-LOCK SANDING DRUM SET HAS KNURLED SHANKS, SO DRUMS CAN BE TIGHTENED OR LOOSENED BY HAND - NO TOOLS REQUIRED. INCLUDES 1/2" X 1/2", 3/4" X 1", 1" X 1", 1-1/2" X 1-1/2" AND 2" X 1-1/2" SANDING DRUMS WITH 50-GRIT SANDING SLEEVES TO FIT EACH. 916-878 - MINI DRUM SANDING SET HAS 1/8" DIA. SHANKS TO FIT ROTARY AND FLEX-SHAFT TOOLS. INCLUDES 3/8" X 1/2", 1/2" X 1/2", 1/2" X 3/4", 3/4" X 1/2" AND 3/4 X 3/4" SANDING DRUMS - COMES WITH 2 FINE AND 2 COARSE SANDING SLEEVES TO FIT EACH DRUM.
801-757 - LARGE SANDING DRUMS ARE LONGER THAN STANDARD DRUMS WITH LARGER DIAMETERS - ALL HAVE 1/4" DIA. SHAFTS, EXCEPT 3" DIA., 129-010, WHICH HAS A 3/8" DIA. SHAFT.
|
|
|
|
Abrasives - Drums & Sleeves
|
SLEEVELESS SANDING DRUMS LET YOU USE ANY SANDPAPER
|
| 3/4" X 3" W 1/4" Shaft
...plus other(s)
|
|
A SIMPLE LOCK HOLDS SANDPAPER TIGHT SO YOU CAN USE ROLL OR SHEET PAPER FOR BIG SAVINGS OVER SANDING SLEEVES. SPONGE RUBBER BACKING INCREASES SANDPAPER LIFE AND REDUCES GOUGING; 1,750 RPM RECOMMENDED SPEED. DRUMS HAVE A 1/2" BORE. EACH HAS A 1/2" ADAPTER FOR USE IN DRILL PRESSES AND LATHE CHUCKS (DRUMS SMALLER THAN 2" DIAMETER HAVE 1/4" ADAPTERS). 901-865 - FOUR DRUM SET (3/4", 1", 2" AND 3" X 3") INCLUDES THREE ADAPTERS .
|
|
|
|
Abrasives - Drums & Sleeves
|
CARBIDE SANDING SLEEVES OUTLAST HUNDREDS OF REGULAR SLEEVES
|
| 1/2" X 2" Coarse Sanding Sleeve
...plus other(s)
|
CARBIDE SANDING SLEEVES ARE ALMOST INDESTRUCTIBLE!
AGGRESSIVE, FREE CUTTING AND WON'T LOAD UP WITH MOST MATERIALS. USE WITH POWER DRILL, FLEX SHAFT OR DRILL PRESS TO SHAPE AND SAND WOOD, TILE, FIBERGLASS OR PLASTIC. EACH WILL FIT ONTO A 2" LONG, APPROPRIATE DIAMETER DRUM SANDER (SOLD SEPARATELY).
LIMITED TO QUANTITIES ON HANDBUY SLEEVES IN SETS OF FOUR AND SAVE!
|
|
|
|
Abrasives - Drums & Sleeves
|
REPLACEMENT ACCESSORIES FOR SAND-RITE DB-612 PNEUMATIC DRUM/BRUSH HEAD SANDERS
|
| 3" X 9" 60x Sanding Sleeve
...plus other(s)
|
YOU CAN EASILY MAINTAIN YOUR SAND-RITE DB-612 SANDER WITH FACTORY ORIGINAL REPLACEMENT ACCESSORIES AT SPECIALLY REDUCED, SELL OUT PRICES:
6" X 7" CANVAS JACKETS, RUBBER TUBES AND AIR VALVE ASSEMBLIES PROVIDE OEM CONVENIENCE. PNEUMATIC SANDING DRUMS HAVE 1" DIA. BORES. CUSHIONING ACTION OF THE DRUMS HELPS EXTEND THE LIVES OF THE ALUMINUM OXIDE SANDING SLEEVES. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Drums & Sleeves
|
4-1/2" SPINDLE SANDER SLEEVES
|
| A/o Sleeve Kit For Pc#121 Sander
...plus other(s)
|
PREMIUM QUALITY SPINDLE SANDER SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND:
SPECIFICALLY DESIGNED TO FIT CLAYTON (100, 135, 140), DELTA® (B.O.S.S.), PORTER-CABLE® (121) AND RYOBI® (OSS450) 4-1/2" OSCILLATING SPINDLE SANDERS. AVAILABLE INDIVIDUALLY OR IN SETS. 893-709 - FIVE, EACH, 1/2", 3/4", 1" DIA. - 50, 80, 150 AND 220 GRITS (60 TOTAL). 893-716 - FIVE, EACH, 1-1/2", 2", 3" DIA. - 50, 80, 150 AND 220 GRITS (60 TOTAL). 103-043 - FIVE, EACH, 1/2", 3/4", 1", 1-/2", 2" DIA. - 50, 80, 150 AND 220 GRITS (FOR PORTER-CABLE®). USA.
|
|
|
|
Abrasives - Drums & Sleeves
|
HEAVY DUTY PNEUMATIC SANDING DRUMS
|
| 4-3/8"x9" Pneumatic Drum
...plus other(s)
|
THE SOFT, FLEXIBLE PROFILE OF A SLIGHTLY INFLATED PNEUMATIC SANDING DRUM LETS IT HANDLE CONTOURS AND SOFTER EDGES:
WHEN FULLY INFLATED, THE DRUM IS AS AGGRESSIVE AND STRAIGHT AS ANY SANDING DRUM. 1-1/4" BORE.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
"J" WEIGHT SANDING SLEEVES - 918-671.
|
|
|
|
to see Sub Categories)
