Product Category
(Click on  to see Sub Categories)
|
|---|
Abrasives (23)
Detail (23) |
|
|
Abrasives - Detail
|
MOUNTED AND UNMOUNTED FLAP SANDING WHEELS
|
| 1" X 1" X 1/4" 60x Flap Wheel
...plus other(s)
|
A&H ABRASIVES™ ALUMINUM OXIDE MOUNTED AND UNMOUNTED FLAP WHEELS ARE WELL SUITED FOR DEBURRING, SCALE REMOVAL, CLEANING AND SURFACE PREPARACTION ON FERROUS AND NON-FERROUS METALS, PLASTICS, RUBBER AND WOOD:
MOUNTED FLAP WHEELS HAVE A 1/4" SHANK ALLOWING MOUNTING ON A 1/4" OR LARGER CHUCK - IDEAL FOR HIGH RPM DIE GRINDERS, AIR TOOLS, DRILL MOTORS AND OTHER PORTABLE AND STATIONARY POWER TOOLS. UNMOUNTED FLAP WHEELS ARE BEST FOR A UNIFORM FINISH ON CONTOURED PARTS (METAL, PLASTIC, WOOD) - USE WITH PORTABLE AIR TOOLS, ELECTRIC TOOLS AND BENCH GRINDERS. USA.
|
|
|
|
Abrasives - Detail
|
1/4-20 FLAP WHEELS AND ADAPTERS - TWIST ON, TWIST OFF CONVENIENCE
|
| 1x1x1/4-20 60x Flapwheel
...plus other(s)
|
YOU GET ALL OF THE HIGH SPEED, FAST CUTTING BENEFITS WITH THE CONVENIENCE OF TWIST ON, TWIST OFF CONNECTIONS WITH A&H ABRASIVES™ 1/4-20 FLAP WHEELS AND ADAPTERS:
FLAP WHEEL ADAPTERS ALLOW FOR WHEEL QUICK CHANGES WITHOUT HAVING TO REMOVE THE ADAPTER FROM YOUR 1/4" CHUCK TOOL - TWO LENGTHS TO SELECT FROM. USA.
|
|
|
|
Abrasives - Detail
|
PHENOLIC BACKING PLATES PROVIDE MAXIMUM FLEXIBILITY WHEN WORKING WITH RESIN FIBER ABRASIVE DISCS
|
| 5" Phenolic Plate Back Up Pad
...plus other(s)
|
PHENOLIC BACKING PLATES FIT ALL 5/8-11 THREAD SANDERS AND PROVIDE THE EXTRA SUPPORT NEEDED WHEN USING HEAVY DUTY RESIN FIBER ABRASIVE DISCS:
THREE SIZES TO SELECT FROM (3" RUBBER PAD MUST BE USED WITH EACH). OPTIONAL SPANNER WRENCH AND DISC PAD NUTS MAKE INSTALLATION FASTER AND EASIER.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CERAMIC RESIN FIBER ABRASIVE DISCS - 127-504. ZIRCONIA ALUMINA ABRASIVE DISCS - 125-516. ALUMINUM OXIDE ABRASIVE DISCS - 100-808. SILICON CARBIDE ABRASIVE DISCS - 121-076.
|
|
|
|
Abrasives - Detail
|
SPIRAL BAND SLEEVES PROVIDE HUNDREDS OF USES
|
| 1/2" X 1/2" 50x A/o Spiral Band
...plus other(s)
|
PREMIUM QUALITY SPIRAL BAND SLEEVES FEATURE TOP QUALITY FRIABLE ALUMINUM OXIDE WITH A FULL RESIN BOND AND X-WEIGHT CLOTH BACKING:
USE ON OSCILLATING SPINDLE SANDERS, DRILL PRESSES OR HAND HELD TOOLS. PERFECT FOR SMOOTHING EDGES ON CURVED SURFACES AND ODD SHAPES - NO OTHER TOOL CAN SAND OR SMOOTH THE INSIDE OF HOLES BETTER. USA. NOTE: GRIT SIZE IS FOLLOWED BY "X".
|
|
|
|
Abrasives - Detail
|
ALUMINUM OXIDE CARTRIDGE ROLLS FEATURE RESIN BOND CLOTH
|
| 3/8x1x1/8 50x Half Tap Crtrdg Rl
...plus other(s)
|
A&H ABRASIVES™ CARTRIDGE ROLLS OFFER UNEQUALLED ECONOMY AND FAST CUTTING:
IN USE, EACH LAYER OF CLOTH WEARS THROUGH TO EXPOSE NEW CUTTING SURFACES THAT CONTINUE TO CUT AND POLISH. EXCELLENT FOR DEBURRING, BLENDING AND POLISHING. AVAILABLE IN A WIDE RANGE OF GRITS AND SIZES TO MEET YOUR REQUIREMENTS. USA.
|
|
|
|
Abrasives - Detail
|
SAITECH ULTIMATE PERFORMANCE GRINDING WHEELS - THESE ARE THE GOOD ONES!
|
| 4-1/2x1/4x7/8 Saitech Grind Whl
...plus other(s)
|
SAITECH TYPE 27 (FLAT FACE) ULTIMATE PERFORMANCE GRINDING WHEELS ARE CONSTRUCTED USING 3M CUBITRON™ CERAMIC GRAIN, MAKING THEM IDEAL FOR THE TOUGHEST MATERIALS:
BEST SUITED FOR CUTTING STAINLESS STEEL AND OTHER HIGH TENSILE ALLOYS. AVAILABLE WITH STANDARD CENTER BORE OR PATENTED SUPER-LOCK 5/8-11 HUB. USA.
|
|
|
|
Abrasives - Detail
|
CHOP SAW WHEELS FOR CUSTOM CUTTING APPLICATIONS
|
| 16x3/32x1 Ironworker
...plus other(s)
|
SAIT CHOP SAW WHEELS INCORPORATE SPECIAL FORMULATION AND A UNIQUE BONDING SYSTEM TO PROVIDE THE "ULTIMATE PERFORMANCE" IN CUTTING METALS WITH LOW HORSEPOWER MACHINES:
SAITECH STEEL WORKER™ COMBINES EXTREMELY FAST CUTTING WITH LONG LIFE - EXCELLENT FOR STAINLESS STEEL AND ALL FERROUS METALS. FORMULATED WITH 3M CUBITRON™ CERAMIC GRAIN. STUD KING® WORKS BEST CUTTING THIN METAL AND METAL STUDS WHILE IRON WORKER™ SLICES THROUGH HEAVY METALS AND ANGLE IRON. BOTH FEATURE ALUMINUM OXIDE GRAIN. NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Detail
|
GRINDING SPECIALITIES - TYPE 16, 17, 18 AND 18R CONES AND PLUGS
|
| 2x3 5/8-11 Type 16 Grinding Cone
...plus other(s)
|
CONES AND PLUGS ARE MADE FOR HEAVY DUTY GRINDING AND SNAGGING IN HARD-TO-REACH AREAS:
RESIN BONDED 16 GRIT ALUMINUM OXIDE GRAIN IS DESIGNED FOR FAST REMOVAL AND LONG LIFE. 5/8-11 BORE.
|
|
|
|
Abrasives - Detail
|
BOSCH CORNER/DETAIL SANDER KIT PROVIDES UNIFORM SANDING WITH NO ARCING OR PIVOTING
|
| Bosch 60a Or C-wgt W/holes H&l
...plus other(s)
|
THE BOSCH MODEL 1294VSK CORNER/DETAIL SANDER KIT FEATURES A LOW VIBRATION DESIGN ENGINEERED FOR SMOOTH RUNNING AND OPERATOR COMFORT:
120V, 2.6A, 13,000-19,000 OPM MOTOR. 3-3/4" SANDING PLATE WITH 3/32" DIA. ORBIT. 3 POSITION PAD EXTENDS PAPER AND PAD LIFE. BUILT-IN DUST PORT. USES HOOK & LOOP (H&L) ACCESSORIES. INCLUDES 20 SANDING SHEETS, POLISHING PAD, EXTENSION PAD, NARROW OVAL AND FLAT EXTENSIONS, REGULAR PLATE, CARRYING CASE. 11" OVERALL, WEIGHS 2.4 LBS. ONE YEAR MANUFACTURER'S WARRANTY.
|
|
|
|
Abrasives - Detail
|
PROXXON SANDERS PERFORM WHERE CONVENTIONAL SANDERS CAN'T REACH
|
| 80 Grit Paper For Delta Sander 5pc
...plus other(s)
|
WITH ITS UNIQUE OSCILLATING MOTION, THE PROXXON 38520 DELTA DETAIL SANDER GREATLY REDUCES VIBRATION AND KICKBACK AND ALSO ALLOWS THE USE OF ACCESSORIES, INCLUDING CUTTING BLADES:
115V, 3,000-10,000 OSCILLATIONS PER MINUTE VARIABLE SPEED MOTOR. DIE CAST ZINC HEAD - 2.5" X 2.5" X 2.5" TRIANGULAR SANDING AREA USES HOOK & LOOP PADS. INCLUDES TWO 80 GRIT AND TWO 280 GRIT SANDING PADS, SANDING FLEECE, HARD AND SOFT FELT POLISHERS AND STORAGE CASE. 9" LONG; WEIGHS 1.4 LB. 28904 2" X 2.75" SPRING STEEL, FLEXIBLE SCRAPER IS SUITABLE FOR PAINT, TILE ADHESIVE, SILICONE AND TAR REMOVAL. 28888 REPLACEMENT POLISHING SET INCLUDES SANDING FLEECE AND ONE HARD AND ONE SOFT FELT POLISHER - USE TO PUT HIGH GLOSS ON STAINLESS STEEL, PRECIOUS METALS AND PAINT. 28900 2.5" DIA. HSS CUTTING BLADE IS SEMI-CIRCULAR FOR CUTTING INTO CORNERS. CUTS METAL, WOOD (MODEL BUILDING AND HOUSE DECOR) AND OTHER MATERIALS.
FOR SHAPE FINISHING, MORTISING AND FINE POLISHING, THE PROXXON 38536 BELT SANDER FEATURES A DIE CAST ALUMINUM HEAD, HOLDING THE SANDING ARM, WHICH CAN BE SWIVELED THROUGH 60°:
115V, 985-2,300 FPM VARIABLE SPEED MOTOR - 13"L X 13/32"W BELT. SANDING BELT CAN BE CHANGED IN A MATTER OF SECONDS. ALSO SUITABLE FOR DEBURRING METAL, PAINT REMOVAL AND FINE FINISHING. INCLUDES TWO, 100 GRIT, AND TWO, 240 GRIT, BELTS AND CARRYING CASE. 13" LONG; WEIGHS 1.4 LBS. GERMANY.
|
|
|
|
Abrasives - Detail
|
HIGHEST QUALITY WIRE BRUSH PRODUCTS FOR STRIPPING AND CLEANING
|
| 1x1/4 Knotted .020 End Brush
...plus other(s)
|
A&H ABRASIVES™ WIRE BRUSH PRODUCTS ONLY USE HARDENED AND TEMPERED PREMIUM QUALITY WIRE:
IDEAL FOR DEBURRING, WELD EDGE CLEANING, REMOVAL OF SCALE, SPATTER, HEAVY RUST AND CORROSION. CARBON STEEL (100-931, 100-946, 100-967 USE STAINLESS STEEL WIRE). USA.
|
|
|
|
Abrasives - Detail
|
TYPE 1 HIGH SPEED CUT OFF WHEELS EXCEL AT METAL CUTTING
|
| 1/4x1/4 Cut Off Wheel W/adaptor
...plus other(s)
|
SAIT TYPE 1 CUT OFF WHEELS ARE FAST CUTTING AND EXTREMELY LONG LASTING FOR TOUGH APPLICATIONS:
SEVEN SIZES AND THREE TYPES OF ALUMINUM OXIDE GRIT TO SELECT FROM: A24R - MEDIUM BOND, GENERAL PURPOSE - IRON, STEEL, WELDS, ETC. A36T - HARD BOND, AGGRESSIVE CUTTING - IRON, STEEL, WELDS, STAINLESS STEEL. A60S - HARD BOND, EXTREMELY FAST - IRON, STEEL, WELDS, ETC. NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA. OPTIONAL WHEEL ADAPTERS AND MANDREL SET ALLOW YOU TO ACCOMMODATE DIFFERING BORE DIAMETERS - 1/4" SHANKS.
|
|
|
|
Abrasives - Detail
|
SAIT GENERAL PURPOSE GRINDING WHEELS MEET DIFFERING METALWORK REQUIREMENTS
|
| 3x1/4x3/8 A24n Grinding Wheel
...plus other(s)
|
TOP QUALITY, SAIT TYPE 27 (FLAT FACE) DEPRESSED-CENTER GRINDING WHEELS HAVE UNIFORM GRAIN THROUGHOUT AND ARE INTERNALLY REINFORCED WITH DURABLE FIBERGLASS FOR MAXIMUM SAFETY AND LONGER LIFE:
A24N GRINDING WHEELS - ALUMINUM OXIDE GRAIN PLUS A SOFT BOND FOR FAST STOCK REMOVAL. USE ON ALL FERROUS METALS (IRON, STEEL, WELDS, ETC.) PLUS STAINLESS STEEL. A24R GRINDING WHEELS - ALUMINUM OXIDE GRAIN PLUS A MEDIUM BOND FOR LONGER LIFE. USE ON FERROUS METALS. AVAILABLE WITH STANDARD CENTER BORE OR PATENTED SUPER-LOCK 5/8-11 HUB. USA.
|
|
|
|
Abrasives - Detail
|
SAIT ALUMINUM GRINDING WHEELS DESIGNED FOR NON-FERROUS METALS
|
| 5x1/4x7/8 A46n
...plus other(s)
|
SAIT TYPE 27 (FLAT FACE) A46N ALUMINUM GRINDING WHEELS USE ALUMINUM OXIDE GRAIN IN A SOFT BOND FOR AGGRESSIVE MATERIAL REMOVAL WITHOUT LOADING:
IDEAL FOR ALL NON-FERROUS METALS (ALUMINUM, BRASS, COPPER, ETC.). AVAILABLE WITH STANDARD CENTER BORE OR PATENTED SUPER-LOCK 5/8-11 HUB. USA.
|
|
|
|
Abrasives - Detail
|
REPLACEMENT WHEELS FOR STATIONARY CUT OFF MACHINES
|
| 14x3/32x1 A46n Alum Chop Saw Wheel
...plus other(s)
|
SAIT CUT OFF WHEELS ARE DESIGNED WITH MAXIMUM GRAIN EXPOSURE TO CUT THROUGH LARGE DIAMETER, SOLID METAL STOCK:
INTERNAL FIBERGLASS REINFORCEMENT AND DUAL EXTERNAL MOUNTING AREA REINFORCEMENT HELP PROVIDE MAXIMUM SAFETY AND CONTROLLED PERFORMANCE. NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Detail
|
SPECIALITY REPLACEMENT CUT OFF WHEELS FOR PORTABLE SAWS
|
| 14x1/8x20mm A24r
...plus other(s)
|
THESE SAIT CUT OFF WHEELS ARE DESIGNED FOR USE ON HIGH HORSEPOWER MACHINES AND FEATURE RUGGED FIBERGLASS REINFORCEMENT FOR MAXIMUM SAFETY:
A24R - ALUMINUM OXIDE GRAIN, GENERAL PURPOSE - FERROUS METALS (STEEL, ANGLE IRON, REBAR). A30S - SPECIAL ALUMINUM OXIDE GRAIN, FAST, NON-BINDING CUTTING - FERROUS METALS, STAINLESS STEEL, HIGH TENSILE ALLOYS. HOBO - EXCELLENT FOR THE RAILROAD INDUSTRY - HEAVY SECTIONS OF FERROUS METALS (I-BEAMS, BAR STOCK). BRUTE - EXTREMELY HARD BOND FOR CUTTING SHARP EDGES - THIN METAL, SHEET METAL, DECKING. DUCTILE - ALUMINUM OXIDE/SILICON CARBIDE COMBINATION - DUCTILE PIPE, WATER MAINS, CONCRETE ENCASED METAL. NOTE: CUT SPEED IS MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Detail
|
SAV-A-DISC BACK-UP PAD SETS SIGNIFICANTLY INCREASE RESIN FIBER DISC LIFE AND IMPROVE QUALITY
|
| 3" Rubber Back Up Pad
...plus other(s)
|
PATENTED SAV-A-DISC BACK-UP PADS CAN EXTEND THE LIFE OF RESIN FIBER ABRASIVE DISCS BY UP TO 3 TIMES!:
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
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CERAMIC RESIN FIBER ABRASIVE DISCS - 127-504. ZIRCONIA ALUMINA ABRASIVE DISCS - 125-516. ALUMINUM OXIDE ABRASIVE DISCS - 100-808. SILICON CARBIDE ABRASIVE DISCS - 121-076.
|
|
|
|
Abrasives - Detail
|
REDUCED PRICE FEIN TRIANGULAR SANDER ELIMINATES MOST HAND SANDING
|
| 100 Grit Psa Triangular Sandpaper
...plus other(s)
|
THE PAD ON THE FEIN MODEL MSX 636-1 TRIANGULAR SANDER MEASURES 3-1/8" CORNER TO CORNER AND MOVES AT 20,000 OPM - IDEAL FOR SPOT SANDING IN TIGHT CORNERS:
120V, 60HZ, 150W MOTOR - 16.4 FOOT LONG POWER CORD WITH PLUG. TRIANGULAR HEAD CAN BE TURNED TO ANY DESIRED ANGLE - SANDER USES PRESSURE SENSITIVE ADHESIVE ABRASIVES. 10-7/16" LONG SANDER WEIGHS 3 LBS. PLASTIC STORAGE CASE INCLUDED. GERMANY.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Detail
|
TOP QUALITY GOLD SANDPAPER FOR DETAIL SANDERS WITHOUT THE GOLDEN PRICE
|
| Mouse Shape 80a/c H&l A/o
...plus other(s)
|
RESIN BONDED A&H ABRASIVES™ GOLD SANDPAPER FITS VIRTUALLY ALL MAJOR BRAND DETAIL SANDERS:
HOOK & LOOP (H&L) OR PRESSURE SENSITIVE ADHESIVE (PSA) BACKINGS; NO DUST HOLES. PSA ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN. 40, 80, 120, 180 AND 240 GRIT. WOLFCRAFT® STYLE SANDPAPER IS LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Abrasives - Detail
|
ADD NEW LIFE TO YOUR DISCONTINUED BOSCH IN-LINE GRIP JIGSAW WITH GENUINE BOSCH ACCESSORIES
|
| Fiber Brush
...plus other(s)
|
WHILE IT MIGHT STILL BE POSSIBLE TO FIND BLADES FOR BOSCH IN-LINE GRIP JIGSAWS, LIKE MODELS B4050 OR THE 3294EVS SHOWN, LOCATING THE GENUINE BOSCH ACCESSORIES THAT MAKE THESE TOOLS TRULY VERSATILE CAN BE MUCH MORE DIFFICULT. THAT'S WHY WOODWORKER'S SUPPLY® IS MAKING ITS REMAINING STOCKS OF THESE ACCESSORIES AVAILABLE AT GREATLY REDUCED PRICES:
898-703 - T321SB WIRE BRUSH, 9" OAL, 6-1/2" LONG BRUSH, BOSCH T-SHANK. 898-710 - T323GB FIBER BRUSH, 9" OAL, 6-1/2" LONG BRUSH, BOSCH T-SHANK. 898-717 - JA1202 45° MITER GUIDE. 898-724 - JA1201 90° MITER GUIDE. 898-731 - JA1203 GUIDE FENCE AND CIRCLE ATTACHMENT, 6-1/4" RADIUS (REQUIRES 90° MITER GUIDE TO ATTACH TO TOOL). SWITZERLAND.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
