BLUM® 563H AND 569H TANDEM PLUS BLUMOTION UNDERMOUNT DRAWER SLIDES.
GET BLUMOTION SOFT CLOSING AND PERFECT DRAWER FRONT ALIGNMENT WITH FOUR DIMENSIONAL ADJUSTMENT.
Full extension steel runners with 4-way adjustability, integrated BLUMOTION soft close and 100 lb load capacity: Exceed ANSI/BIFMA grade 1 performance requirements. 563H, 569H and 569. slides fit drawer side thicknesses 13mm (1/2") to 16mm (5/8"). 563F, 569F and 569A slides only fit only 19mm(3/4")drawer sides. Slides have elongated mounting holes for +/- 4.5mm of depth adjustment. Drawers attach to runners by front locking devices fastened to the drawer bottoms. (purchase separately.) Standard front locks allow for +/-1/16" side to side movement - the equivalent adjustment can be made on the rear of the runner. Depth adjustable front locksfor inset drawers allow lateral adjustment and 2.5mm (3/32") out adjustment. Locks are offered each or in sets of 6 pairs (6L and 6R). Front locks mount with either #6x5/8" Flat Head or Truss Head screws (purchase separately). The rear notch on the drawer box now must be cut 35mm(1-3/8") wide to allow for lateral adjustment. Drawer box length must equal slide length; drawer box width calculations remain unchanged. Runners now feature mounting holes on the bottom of the rail for direct mounting to shelves or cabinet bases. Runners mount with #6 x 5/8" flat head screws. We offer a zinc plated #6x5/8" FH screw with a slightly oversize head to give better hold. (screws sold separately.) Use rear mounting sockets face frame applications: For the 9" slides, use 152-000 nylon rear brackets for cabinet depths of 266-282mm, and 155-138 for cabinet depths 283-299mm (long). For 12" and longer slides use the 136-007 metal bracket or the 163-437laterally adjustable nylon socket. Note: for large or heavily loaded drawers, it is best to block out the cabinet sides to mount the slides. Mounting holes for all components are best located using the new TANDEM+BMN Boring Template 563/569. Requires a 2.5mm twist drill bit and a 6.0mm twist bit (purchase separately). Tool kit for boring template includes 1-6mm diameter stop collar, 1-2.5mm extension chuck, one screwdriver bit and one hex key. Slides include complete mounting instructions. Manufacturer's limited lifetime warranty. Slides made in USA. Accessories in Austria. Note: Front Locking devices for the 563H and 569H series slides are not compatible with other Blum® Tandemplus Blumotion models.TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST: More Blum Front Locks for New Tandemplus Blumotion Slides 164-396